Personal Computer |
Computer Won't Start or Computer is not starting
- Check the computers power source and connections.
- Make sure that power cord is connected to the computer and into source of power. Test the power source. To do that, connect your phone to phone charger and then plug your phone charger into power source and check whether it's alive or not. If you source of power is not alive then try another power outlet. If power outlet is working may be the problem with power cord or Faulty SMPS.
- Push the power button or power switch and listen for the computers cooling fan.
- Listen and watch for beeps, flashing lights on the front panel of PC. If you heard any beep then it may indicate a problem with Memory or Hard Disk.
To know more How to troubleshoot RAM (Random Access Memory) or Hard Disk
- Watch on screen message before windows is loaded. These messages could warn you about hardware failure or error resulting starting your PC.
- If still your PC won't start then do some advanced troubleshooting by opening the side case of your computer and unplug the 24 pin cable as well as 12v 4 pin cable which came from SMPS and re-plug them and check weather your PC working or not. If problem is not resolve then it seems your motherboard or SMPS is need to be repair by chip level repair expert or replace.
Solve Basic Hardware Problems
Computer's Audio is not working
- Make sure audio is note Mute.
- Make sure Windows Audio service is started by accessing service.msc console.
- Check with external speakers.
USB is write protected
- Open notepad and copy & paste below command. Save notepad as "Name.reg" (Without quotation mark)
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies]
"WriteProtect"=dword:00000000
- After saving above code execute saved registry. If still USB is write protected then I'm sorry to say it's time to buy new USB.
Note: If you have any hardware problem issue please feel free to comment below.
Basic Windows Issues
NTLDR is missingWindows XP |
- Boot your PC from Windows XP cd or USB.
- After loading all files then "Press R".
- Then type below two commands
copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\
- And restart your PC.
If you have any problem or suggestion regarding Hardware, Software,
Network etc feel free to comment. These are just common computer
problems. If you like my blog then share it with your friends and Sign
UP for Email updates.
No comments:
Post a Comment